Product ID:3979S, THINNER
MSDS Date:01/01/1985
FSC:8010
NIIN:00N003924
MSDS Number: BCLDZ

Emergency Phone: 800-441-7515

Info Phone: 800-441-7515

Cage: 18773

Telephone: 800-441-7515;800-441-9442

Cage: 18873

2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)

CAS: 111-15-9

RTECS: KK8225000

Fraction By Weight: 100%

OSHA PEL S,100 PPM

ACGIH TLV: S, 5 PPM; 9192

Effects of Overexposure:HEADACHE, NAUSEA, IMPAIRMENT OF REACTION TIME &
COORDINATION.

First Aid:INH:MOVE TO FRESH AIR TO IMPROVE BREATHING. SKIN:WASH W/SOAP
& WATER. REMOVE CONTAMINATED CLOTHING & WASH BEFORE REUSE. EYES:
FLUSH W/WATER AT LEAST 15 MINS, CALL MD.

Flash Point:100-140F CC
Lower Limits:1.70
Upper Limits:7.00
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:H*2O FOG NOZZLE:USE TO COOL CLSD CNTNR,PRVNT
PRESS BUILD UP.

Spill Release Procedures:AVOID PROLONGED CONTACT W/SKIN & BREATHING OF
VAPOR. REMOVE SOURCES OF IGNITION. REMOVE W/INERT ABSORBENT.
VENTILATE AREA.

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS,OPEN FLAME.
CLOSE CONTAINERS AFTER EACH USE. DO NOT STORE ABOVE 120F,49C.
CONTAINERS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:WASH THOROUGHLY AFTER HANDLING & BEFORE EATING OR
SMOKING. OBSERVE LABEL PRECAUTIONS.

Respiratory Protection:NIOSH/MSHA APPRVD IF AIR CONTAMINANT CONTROL IS
NOT FEASIBLE.
Ventilation:LOC & MECH ADEQUATE TO KEEP BELOW TLV/LEL.REMOVE IGN
SOURCES
Protective Gloves:BUTYL RUBBER
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:USE APPROPRIATE INDUSTRIAL HYGIENE
PRACTICES.
Supplemental Safety and Health
BP:130-175C. FL PT:38-60C CC. BP IS APPROX RANGE. VAP PRESS & VAP
DENSITY ARE FOR PRINCIPAL SOLVENT.

Boiling Pt:B.P. Text:266-347F
Vapor Pres:1.2
Vapor Density:4.7
Spec Gravity:0.969
Evaporation Rate & Reference:<1.0, ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID THINNER W/CHARACTERISTIC ODOR
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE
Hazardous Decomposition Products:CO, CO*2, SMOKE

Waste Disposal Methods:DISPOSAL METHOD MUST COMPLY W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.